LCD-9151-201-x Installation Manual
Document # 540334, Rev IR1, 10/2006
Page 14 of 20
A typical Monitor Setup Menu consists of the following modes
:
1. “OSD TIMEOUT”- Timeout period until monitor defaults out of menu mode.
2. “BACKLIGHT”- Backlighting intensity.
3. “FACTORY PRESET”- All modes may be reset to the default factory setting. Select
either “YES” or “NO”.
4. “SOURCE PRIORITY”- Selects priority operating mode to “PC” (personal computer)
or “None”. Setting this mode to “PC” allows user to normally view composite video
until a PC laptop is turned on, then the monitor will automatically switch to PC input
upon sensing VGA input.
5. “H-POS”- Adjusts viewing area horizontally.
6. “V-POS”- Adjusts viewing area vertically.
7. “SHARPNESS”- Adjusts picture sharpness.
8. “COLOR”- Adjusts picture color.
9. “TINT”- Adjusts picture tint.
10. “CONTRAST”- Adjusts picture contrast.
11. “BRIGHT”- Adjusts picture brightness.
The setup menu may vary slightly from monitor model to model. As
technology advances, additional features may be added to the setup
menu and existing features may be modified. Audio International’s
intention is to provide clear and concise instructions on any new or
modified feature in the setup menu as these changes occur.
4.0
Instructions for Continued Airworthiness
4.1 Airworthiness
Limitations
No
periodic scheduled maintenance or calibration is required for continued
airworthiness of the LCD-9151-201-x. If the unit fails to perform to
specifications, it must be removed and serviced by a qualified service
facility.