DVD-201-01(-02, -03)-x Installation & Operation Manual
Document # 540211, Rev C, 05/2002
Page 16 of 24
SECTION III – OPERATION
1.0 General
Information
1.1
The DVD-201-01(-02, -03)-x can be operated via front panel buttons or
optionally controlled by infrared remote or AI’s touch screen panel. Digital
codes allow the unit to interface with an infrared handheld remote via an
infrared receiver, IFR-9A or IFR-485. Multiple units can be controlled
independently using available programming pins.
1.2
Playback options with front button control, remote or touch screen include
play, skip, pause and stop.
1.3
Before setup or playing a disc, ensure that aircraft power is applied to the
player. There are no on/off controls on the unit.
1.4 Activate monitors and speakers from the appropriate control panels.
Audio will be supplied through headphones and/or speakers per system
design.
1.5
If power is interrupted (>200 msec) or power drops below +18 VDC while
a disc is playing, the player will shut down. If a DVD disc is in the player,
the unit will begin playback from the beginning of the disc automatically. If
an audio CD is in the player, the
PLAY
button must be pressed on the
front panel or on the infrared remote control before the CD audio can be
heard.