®
Owner’s Enjoyment Manual
INSTALLING YOUR
FOUR.1
i
IN-DASH EQUALIZER
Having absorbed everything in the manual up to this
point, you probably know we endorse having a professional
install your FOUR.1
i
. Above and beyond having all of the
appropriate technical know-how and experience, they have
lots of cool tools.
If you are still with us and are feeling confident, then
read on. . .
A. Placement and Mounting the FOUR.1
i
A.
In-Dash Equalizer
Placement:
By definition, the FOUR.1
i
in-dash equal-
izer was designed to be installed in or near the dashboard of
most cars. However, if you are a building a real trick system,
like with a separate audio system in the front
and
rear of a
vehicle, the FOUR.1
i
is an ideal pre-amp control that can be
mounted in the front and/or the rear of the vehicle.
Mounting:
The FOUR.1
i
is flexible enough to mount
almost anywhere, although somewhere on the dash or in a
center console is the most logical. You will want to be able to
access it while you are sitting in the driver’s seat of your
vehicle. The FOUR.1
i
can be physically mounted almost
anywhere in a vehicle, although we recommend that you
avoid hot spots like the firewall, engine compartment, or tail
pipe. The mounting location must also be safe from water
seepage or areas with bad seals (rubber gaskets, not sleek
furry mammals who eat salmon). If there are old water
stains, stay away.
We have also provided brackets to allow you to mount
the FOUR.1
i
chassis under the dashboard or glovebox. The
screw holes on the FOUR.1
i
chassis also allow for easy
installation underneath a radio or with a dash kit. It is of
utmost importance to mount the FOUR.1
i
securely to avoid
any undue stress or breakage from acceleration, braking or
crashing.
8
Figure 4: FOUR.1i with mounting brackets
