Audio Control M6400 / M4800 / D4600
Crestron Driver User Guide
2
Introduction
This driver has been designed to provide two-way control of AudioControl M4800, M6400
and D4600 network amplifiers, via TCP/IP.
The package includes a demonstration file in smw format to aid with integration into a
Crestron project. Additionally, touch panel designs have been created, these can be used
for demonstration purposes and for compatibility testing.
This Crestron module will work on Series 3
There are four modules included in the package:
Comms
This module has three purposes:
•
Sending and receiving commands to/from the amplifier
•
Routing feedback to the other modules
•
Assigning zones to groups
Zone Analogue
This driver handles source selection, volume, power, EQ and feedback for a specified
analogue zone. There will be one instance of this driver per analogue zone.
Zone Digital
This driver handles the source selection and power control for a specified digital zone. There
will be one instance of this driver per digital zone.
Group
This driver handles source selection, volume, power, EQ and feedback for a specified group
of zones. There will be one instance of this driver per group.
