4
5
Model 1111
RF Injector
RF Base Station or
Automation Controller
1 2 3 4 5 6
IR Command Outputs
Output to Cat 5 Receivers
Input from Head End
Zone 1
Zone 4
Model 9879
Cat 5
Receiver
Model 9879
Cat 5
Receiver
RF Remote
for Zone 4
RF Remote
for Zone 1
RF signals
sent to
Base
Station
1
4
AVAtrix
Typical Application: The AVAtrix is connected to six TVs in remote zones (only two zones
are shown). Each zone has a dedicated RF remote control that sends commands to the RF
base station. The base station translates the commands to IR and sends the IR command
out on the corresponding IR output port. A command from the zone 4 RF remote is output
on the base station’s #4 IR port, and received by the 1111 as a command from the zone 4
Cat 5 receiver.
Model 1111
is installed near the AVAtrix,
and a controller with multiple
outputs is connected to the
1111 IR ports.
Note: This system shows two Cat 5
receivers out of a total capacity of six.
3.5mm custom patch cables
Cat 5/6
