Dante-MY16-AUD2 User Guide
Copyright © 2016 Audinate Pty Ltd. All rights reserved.
-32-
Mode
Name
Description
Mode
4
All Inactive
HA Remote data is not bridged at all. This is the default mode.
Product / Mode matrix
For information about the most suitable HA Remote mode for your device, please see the table below.
HA Remote Mode
1
2
3
4
CL1/3/5
✓
✓
✗
N/A
QL1/5
✓
✓
✗
N/A
M7CL-48ES
✓
✓
✗
N/A
LS9
✓
✓
✗
N/A
PM5D
✗
✗
✓
N/A
M7CL-32/48
✗
✗
✓
N/A
DM2000
✗
✗
✓
N/A
DM1000
✗
✗
✓
N/A
DME64N
✗
✗
✓
N/A
DME24N
✗
✓
(as an HA
device)
✓
(as a controller)
N/A
Other MY-compatible
models
✗
✗
✓
(as an MY card
host)
✓
Special Considerations
Some Yamaha devices (listed below) do not bridge HA Remote control data directly from the host device
to an installed Dante-MY16-AUD2 card. For these devices, use a straight-through male-to-female DB9
(DE9) cable to connect the REMOTE port on the host device to the Serial port on the Dante-MY16-AUD2
card, and select HA Remote Mode 3 in Dante Controller for the Dante-MY16-AUD2 card. Then connect the
device to the network switch using the Primary Ethernet port on the Dante-MY16-AUD2 card.
Affected devices:
n
DM1000
n
DM2000
n
PM5D
n
M7CL
‐
32/48
n
DME24N
n
DME64N