Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Procedure:
– Apply stamp of Audi Workshop.
– Enter date of work carried out.
– Mark relevant field(s).
Note
Only for markets not using the Digital Service Schedule.
3.43
Seat belts: checking that retaining rivets
are fitted, and checking locking action of
automatic belt retractor
Procedure:
For all seat belts installed:
– Check that retaining rivets/clips are fitted.
– Check locking action of automatic belt retractors when belt is
unrolled abruptly.
Note
If the seat belt is securing an object (e.g. child seat), do not re‐
lease the seat belt. Only check the locking action when the belt
is buckled; it is not necessary to check the retaining rivet/clip in
this case.
3.44
Vehicle interior: removing protective
covers for seats and carpet
Procedure:
– Remove protective covers for seats and carpet carefully and
completely from vehicle interior.
3.45
Vehicle interior: checking that it is clean
and cleaning if necessary
Procedure:
Check that the following items are clean (clean them if necessa‐
ry):
♦ Front seats
♦ Rear seat bench
♦ Interior trim
♦ Carpets
♦ Floor mats
♦ Windows/windscreen
Audi R8 2015 ➤
Maintenance - Edition 03.2016
3. Maintenance
47
