Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Operate horn and check proper function of treble horn and
bass horn.
Note
Perform this check outdoors, e.g. when driving the vehicle to the
workshop or during a road test.
3.39
Passenger airbag: checking key switch
on / off and setting to "on"
Switch for “Airbag ON/OFF” is located in glove box -arrow-.
Procedure:
– Turn switch to “AIRBAG OFF” position.
– Switch ignition on and wait for vehicle to complete initial sys‐
tem check.
– Check that “PASSENGER AIRBAG OFF” display lights up in
instrument cluster.
– Switch off ignition.
– Turn switch to “AIRBAG ON” position.
– Switch ignition on and wait for vehicle to complete initial sys‐
tem check.
– Check that “PASSENGER AIRBAG OFF” disappears.
– Switch off ignition.
Note
The amount of time needed for the vehicle system check varies
depending on the model and equipment.
3.40
Owner's literature: checking that all
documents are present
Procedure:
– Check that all parts of owner's literature are present, and pre‐
pare them for handover to customer.
3.41
Service Schedule: affixing vehicle data
sticker
The vehicle data sticker can be found in the supplied pack.
Procedure:
– Remove vehicle data sticker from supplied pack.
– Affix vehicle data sticker in Service Schedule under “Warranty
entitlement record”.
3.42
Service Schedule: entering Delivery In‐
spection
The field for documenting the Delivery Inspection can be found
on page 2 of the Service Schedule.
Audi R8 2015 ➤
Maintenance - Edition 03.2016
46
3. Maintenance
