GOLDENEAGLE TV 6.0.x user manual – 07/2012
Page 37
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
–
www.audemat.com
6.1.10. SMTP Mail Client
¾
Configuration of e-mails :
Enter the SMTP server address, account information, and destination e-mail addresses to enable
sending of e-mail alerts. Ask your network administrator for the SMTP parameters. (Note that you
must have a valid DNS setup if you want to use SMTP host name. Otherwise you must use a
numeric IP address xxx.xxx.xxx.xxx).
The “send mail every” section enables the user to send messages in a batch every “X” minutes if
desired. When waiting for the time chosen by the user, the GOLDENEAGLE TV stores the
messages.
Two sections are available that allow the user to configure the contents of the subject line and the
first line of the body of the alarm e-mail. Any text entered in these windows will be included, and
there is a list of variables (in brackets) that can be included as well. This feature allows the user to
customize the first parts of the alarm e-mails to be more compatible with portable devices.
List of available keywords:
Name
Description
Can be inserted in the
subject of the mail
Can be inserted in the
1
st
line of the
{NAME} Product
name
9
9
{DESCRIPTION} Product
description
9
9
{LOCALADDRESS} Product IP address
9
9
{SERIALNUMBER}
Product serial number
9
9
{FIRSTALARM}
Name of the 1
st
alarm
9
The ‘Test settings’ button checks your e-mail settings without having to trigger an alarm.
The ‘Delete pending mails’ button deletes all of the pending e-mails, either test or alarm generated.
L
If a text address is set, the DNS must be configured so as to allow name resolution.
Make sure the gateway can be reached by the server (“Network” page).
