manualshive.com logo in svg

audemat DIGIPLEXER 246, User Manual

Share
Download
audemat DIGIPLEXER 246 User Manual Download Page 82

Digiplexer 246 v2.5.x User Manual – 11/2010 

 

 

Page 82 

Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France) 
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –

 

[email protected]

 – 

www.audemat.com

 

10.2. 

Event log 

 

 

 

Three logs are available: 

•

 

Realtime Log

: current event list. The following information is listed: sub-system, start and end 

time, severity, event type and description. The list is refreshed automatically; it is however 
possible to pause using  

•

 

History Log

: list of filtered historical events. Recording frequency, time during which records 

are kept and the ability to clear the log are set in the system configuration section, ‘I/O log’ 
page. 

•

 

I/O Log

: list of filtered input or output events. Date, sub-system, I/O name, value and unit are 

displayed.  

 

Summary of Contents for DIGIPLEXER 246






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands