audemat DIGIPLEXER 246 User Manual Download

Page: 41 / 93

Digiplexer 246 v2.5.x User Manual – 11/2010

Page 41

Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –

[email protected]

–

www.audemat.com

6.1.14.

I/O Layout

Motherboard

: the user can view the type of boards (relay, digital) and their

location on the connectors.

COM ports

: the console is part of the default configuration.

Unset

: non-attributed serial port (inactive).

Console

: configuration of the serial port for console (terminal) access.

Modem

: configuration of the serial port in modem port.

Support

: support port. Only used by Audemat.

Tunneling

: serial port configuration for tunneling.

Scriptlet

: to use an API (Advanced Programming Interface to

communicate with external equipment (contact the sales and support
department for more information).

Scriptlet

debug

: do not use.

UECP

: to send UECP commands.

Text Commands

: to send ASCII commands.

Before adding serial ports, please check with Audemat for compatibility.

Summary of Contents for DIGIPLEXER 246






























































































Search results

Summary of Contents for DIGIPLEXER 246

Reviews:

Related manuals for DIGIPLEXER 246

Brands by name

Popular brands

audemat DIGIPLEXER 246, User Manual

Search results

Summary of Contents for DIGIPLEXER 246

Reviews:

Related manuals for DIGIPLEXER 246

Brands by name

Popular brands