audemat DIGIPLEXER 246 User Manual Download

Page: 18 / 93

Digiplexer 246 v2.5.x User Manual – 11/2010

Page 18

Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –

[email protected]

–

www.audemat.com

4.3.

Download

4.3.

Download

This page enables you to download the installer software for the Digiplexer 246 applications. The
installer will install:

Radio all in one

, for RDS Configu Audio System Configu

Transmitter Configu Unit Status.

The Digiplexer Sound Processing software

, for controlling the sound

ScriptEasy:

configuration of remote control functions.

MasterView:

visualization and control of your site in custom views.

Click on “‘All- in-on installer” one installer’, and select ‘Open’ to install the application, or "

Save

" to

install from the hard drive (recommended option). Follow the wizard’s instructions.

Refer to the manual for each application for more information.

The Digiplexer MIB (Management Information Base) may also be downloaded from this page.

Summary of Contents for DIGIPLEXER 246






























































































Search results

Summary of Contents for DIGIPLEXER 246

Reviews:

Related manuals for DIGIPLEXER 246

Brands by name

Popular brands

audemat DIGIPLEXER 246, User Manual

Search results

Summary of Contents for DIGIPLEXER 246

Reviews:

Related manuals for DIGIPLEXER 246

Brands by name

Popular brands