ITEM: AOESCAPE
NOTE: please refer to the diagram on 2.2
Remove either the RIGHT or LEFT earphone from the
Charging Case Station or only turning one of the earphone ON.
Turn ON by touching and holding the Multi-Function button (C)
until you hear the prompt. After a few seconds the earphones
will go into pairing mode (flashing RED & BLUE).
Open your Bluetooth setting on your device and pair again if
needed. The earphones will appear as “audeeo Escape” in the
list of available Bluetooth devices. Select “audeeo Escape” and
connect.
NOTE: Last track function and Volume up & down function will not work in
single earphone mode.
BLUETOOTH
audeeo Escape
1
1
2
3
1
2
3
4
Button Functions
3
Quick Start Guide
3.5
Single Earphone Mode
ANSWER & HANG UP CALLS
When there is an incoming call, press the Multi-Function Button
