AUDAC vc2200, Instruction Manual

Page: 1 / 2

+
-
IN-A
+
-
EC-A
+
-
OUT A1
+
-
24 V
+
-
OUT A2
+
-
24 V
+
-
OUT A3
+
-
24 V
+
-
OUT B1
+
-
24 V
+
-
OUT B2
+
-
24 V
+
-
OUT B3
+
-
24 V
+
-
EC-B
+
-
IN-B
Input plus B
Input plus A
Input minnus A
E-call plus A
Speaker minnus A1
Speaker plus A1
Relay plus A1
Relay minnus A1
IN-A +
IN-A -
EC-A +
EC-A -
OUT A1 +
OUT A1 -
24V +
E-call minnus A
24V -
Connections
Speaker minnus A2
Relay plus A2
Relay minnus A2
OUT A2 +
OUT A2 -
24V +
24V -
Speaker plus A2
Speaker minnus A3
Relay plus A3
Relay minnus A3
OUT A3 +
OUT A3 -
24V +
24V -
Speaker plus A3
Input minnus B
E-call plus B
Speaker minnus B1
Speaker plus B1
Relay plus B1
Relay minnus B1
IN-B +
IN-B -
EC-B +
EC-B -
OUT B1 +
OUT B1 -
24V +
E-call minnus B
24V -
Speaker minnus B2
Relay plus B2
Relay minnus B2
OUT B2 +
OUT B2 -
24V +
24V -
Speaker plus B2
Speaker minnus B3
Relay plus B3
Relay minnus B3
OUT B3 +
OUT B3 -
24V +
24V -
Speaker plus B3
Input plus B
2 3
Installation:
Read and keep all safety and operation instructions for future reference.
For your own safety, follow all cautions and warnings in the operating instructions.
Qualified persons can only do service and installing.
Check the local electrical regulations before you connect the different outputs of
the VC2200 to the speaker cable.
The VC2200 consists of two separated blocks of volume controllers. Each block
can control 100 Watt divided over three canals and has also a separated
emergency call.
When you don’t need a separated emergency call, connect the straps A and B, on
the PCB, with tinsolder.
If you need more than 100 Watt over one loudspeaker you have to connect the
transformer A and B, the 12 straps C on the PCB.
On page 4 you can find the most common connection diagrams of the VC2200.
We use a separated emergency call.