SETUP TOOLS
When the action has been completed, the screen
will briefly display a confirmation message, then
return to the previous menu level.
5.5
USB Save & Load
The USB Save & Load menu lets you:
•
Save parameter settings and all event log entries to an external file (CSV
format)
•
Save parameter settings to an external file (proprietary format)
•
Load parameter settings from a previously saved external file
•
Load custom messages to display on the keypad when a programmable
input is active
NOTE
The EMX4e supports FAT32 file systems. The EMX4e's USB functions are
not compatible with NTFS file systems.
Save & Load Procedure
1.
Connect the external drive to the USB port.
2.
Press MENU to open the menu then select Setup
Tools.
3.
Scroll to USB Save & Load and press the
button.
4.
Scroll to the required function and press the
button.
USB Save & Load
Save Params and Logs
Save Master Params
Load Master Params
5.
At the confirmation prompt, select YES to
confirm or NO to cancel, then press to
proceed.
Save Params and Logs
No
Yes
When the action has been completed, the screen
will briefly display a confirmation message, then
return to the previous menu level.
File Locations and Formats
Save Parameters and Logs: The EMX4e will create a directory at the top level of the
USB drive, named with the soft starter's serial number. The event log and
parameter settings are saved as individual CSV files, and the soft starter's software
and system information are saved to a text file.
Save Master Parameters: The EMX4e will create a file called
Master_Parameters.par, in the top level of the USB drive.
EMX4e User Manual (710-18433-00C) |
35
