AUBO AUBO-i10, User Manual

Page: 110 / 179

V4.5
©2015-2019 AUBO.All rights reserved.
106
Tool Dynamics Calibration
Figure 10-25 Tool Dynamics Calibration
➢ The picture above shows the tool dynamic calibration interface. enter the load, the tool center of
gravity parameters and tool name andclick Add to save the parameters
➢ When modifying the tool dynamics parameters, first, select the item to be modified, and then, enter
the value to be modified, and click the Modify button to complete the modification.
➢ When deleting the tool dynamic parameters, first select the item to be modified, and then click the
Delete button to delete.
➢ It should be noted that, flange_center option is the system default parameter, which can not be
modified and deleted.