10.2.2 CLEANING THE SPRAY ARMS
Ý
Notice
11. TROUBLE SHOOTING
CAUTION
Dirt and/or calcium residue may block the nozzles
on the spray arms. For this reason, regularly check
the spray nozzles.
1
. Lower spray arm
2
. Upper spray arm
2
B
1
A
1. Remove the lower rack from the machine.
2. Pull off the lower spray arm in an upward direction
A
.
3. Loosen the fastening screw of the upper spray
arm and pull off the spray arm
B
by a downward
motion.
4. Clean the spray arms under running water.
5. Replace the lower spray arm in a downward
direction.
6. Replace the upper spray arm and tighten the
fastening screw by turning it around to the left.
7. Insert the lower rack.
What if the dishwasher will not run :
=
Is the machine plugged in?
=
Are all fuses operative?
=
Is the water supply fully turned on?
=
Is the dishwasher door closed securely?
=
Have you pressed the On/Off button?
What if the dishwasher starts but fails to
circulate water within 5 seconds :
=
Cancel the program by pressing the Start/Pause
button for 5 seconds. See section 6. or Quick
Reference Guide.
What if the door will not stay down in open
position :
=
Adjust door tentioners (wooden door models
only, see Installation Manual)
What if the dishwasher produces poor cleaning
results :
=
Follow the instructions given in the following
pages
Ensure that the fastening screw is tight on upper
spray arm.
18
