4.1 UPPER RACK
Load the upper rack with dessert plates, cups,
glasses etc.
4.1.1 HEIGHT SETTING
(DEPENDING ON MODEL)
In certain models, the height setting of the upper
rack may be changed using the wheels which are
present at two height levels
CAUTION
Make sure that the rack is empty. Changing the
height setting while the rack contains tableware
could cause the contents to dislodge, causing
personal injury or damage to the tableware.
1. Release the latches on both the right and left
tracks of the upper rack by turning them to the
outside
A
2. Pull out the rack completely
B
.
3. Place the rack into the tracks again at the desired
height
C
.
4. Push the latches back into the correct position.
4.1.2 VARIABLE HEIGHT SETTING
(DEPENDING ON MODEL)
The upper rack is equipped with a lifting mechanism
which enables you to change the height of the rack
even if it is fully loaded, and without having to
remove it from the dishwasher.
LIFT UPPER RACK
1. To lift the upper rack to a higher position, hold
it on one side and carefully pull it upwards
A
.
2. To lift the opposite side of the rack, hold it and
pull it upwards in the same manner.
LOWER UPPER RACK
1. To lower the upper rack, hold the rack lever on
one side and carefully lower the rack without
releasing the lever
B
.
2. Repeat the procedure with the lever on the
opposite side of the rack.
Ý
Notice :
Make sure that both levers catch in the same height
position.
A
C
B
A
B
5
