ATX TranScend Page 68 Operation Manual Download

Page: 68 / 102

CRAFT LINE INTERFACE (CLI)

5-24

TranScend Chassis – Operation Manual

Example #1: In this example, the module in slot 1 reports the alarm status of laser RF as “MajorLoLo” (e.g. Major

alarm with reading below the low low threshold).

Transcend [slot-1] >LaserRfAlarm

MajorLoLo

ModuleTempAlarm:

Displays the alarm status of module temperature.

Example #1: In this example, the module in slot 1 reports the alarm status of module temperature as Normal.

Transcend [slot-1] >ModuleTempAlarm

Normal

5.1.2.14 Opto-Stacker

The commands in this section are Opto-stacker specific.

ModuleTemp:

Displays the module temperature reading in Centigrade.

Example #1: In this example, the module in slot 1 reports its module temperature reading as 21.4 Centigrade.

Transcend [slot-1] >ModuleTemp

+21.4 deg C

LaserTemp:

Displays the laser temperature reading in Centigrade.

Example #1: In this example, the module in slot 1 reports its laser temperature #1 reading.

Transcend [slot-1] >LaserTemp 1

+23.0 (deg C)

OPoutPower:

Displays the optical output power reading in dBm.

Example #1: In this example, the module in slot 1 reports its optical output power #1 reading.

Transcend [slot-1] >OPoutPower 1

-99.0

dBm

Mode:

Displays the gain control mode setting.

Example #1: In this example, the module in slot 1 reports its channel #1 gain control mode.

Transcend [slot-1] >Mode 1

MGC

OpticalPowerdBm:

Displays the optical input power reading in dBm.

Example #1: In this example, the module in slot 1 reports its optical input power #1 reading.

Transcend [slot-1] >OpticalPowerdBm 1

-99.0

dBm

CHAPTER 5:

Summary of Contents for TranScend







































































































Search results

Summary of Contents for TranScend

Reviews:

Related manuals for TranScend

Brands by name

Popular brands

ATX TranScend, Operation Manual

Search results

Summary of Contents for TranScend

Reviews:

Related manuals for TranScend

Brands by name

Popular brands