manualshive.com logo in svg

ATV IPSDMV22D1, User Manual, Page: 74 / 83

Share
Download
ATV IPSDMV22D1 User Manual Download Page 74

- Up/Down button: 

Navigate through the menu items  

- PAN/TILT Speed:

 It sets a speed when adjusting the PTZ Camera. The higher a value is, 

the faster a speed will be.  

- Focus:

 Overrides auto focus. Moving the Zoom handle reactivates Auto Focus mode.  

- Iris:

 Overrides auto iris. Moving the joystick reactivates Auto Iris mode.  

- Zoom:

 Zoom control.  

• Menu Panel:  

- Menu:

 Enters programming menu.  

- Esc:

 Cancels current inputs. Exits from currently running functions or menu, error status, 

etc.  

- Home:

 Immediately calls Home function. Deletes selected value or function in 

programming mode.  

- Ctrl Off:

 Control function.  

ex) CTRL + Up, Down, Right, Left Button > Operated turbo mode.  

- Preset:

 Pressing the Preset will bring up the preset programming menu.  

- Auto Scan:

 Pressing the Scan will bring up the Auto Scan programming menu.  

- Tour:

 Pressing the Tour button will bring up the tour programming menu directly.  

- Pattern:

 Pressing the Pattern button will bring up the pattern programming menu directly.  

 

4.7 Help  

The Help information window will be provided as a popup window so that users can open and 
read it without a need for log-in. It will offer a description on setting and Help page by which users 
can manipulate the network camera without a reference to the manual.  

 

68 

Summary of Contents for IPSDMV22D1




















































































Reviews:

No comments