ATV IPSDMV22D1 User Manual Download | Manualshive

Page: 40 / 83

background image

The PTZ button activates a pop-up window for Pan, Tilt and Zoom control.

Use this scale to control the volume of the speakers.

Use this scale to control the volume of the microphone.

Use this scale to control the volume of the speakers and microphones.

3) Camera Menu controls

If the network camera has been appropriately configured, the Live View page displays the
controls available for the OSD menu.
For more information, please see “Chapter 3 — Program and Operation”.

4) Pan/Tilt/Zoom controls

If the network camera has been appropriately configured, the Live View page displays the
controls available for the PTZ (Pan Tilt Zoom) or PT device installed. The administrator can
enable/disable the controls for specified users.
Please see “4.6 PTZ Control” for more information.

5) Video and Audio Streams

The network camera provides several images and video stream formats. Your requirements
and the properties of your network will determine the type you use.
The Live View page in the network camera provides access to H.264, MPEG-4 and Motion
JPEG video streams, and to the list of available video streams. Other applications and
clients can also access these video streams/images directly, without going via the Live View
page.

4.5 Network Camera Setup

This section describes how to configure the network camera, and is intended for product
Administrators,

who have unrestricted access to all the Setup tools; and Operators, who have

access to the settings for Basic, Live View, Video & Image, Audio, Event, and System
Configuration.

You can configure the network camera by clicking Setup

in the top right-hand corner of the Live

View page. Click on this page to access the online help that explains the setup tools.

34

«
...
38
39
40
41
42
...
»

Summary of Contents for IPSDMV22D1




















































































Reviews:

No comments

Related manuals for IPSDMV22D1

Brand: Ebode Pages: 76

Brand: Zavio Pages: 16

Brand: Zavio Pages: 42

Brand: Zavig Pages: 10

Brand: Hanwha Vision Pages: 11

Brand: Samsung Pages: 60

Brand: Digimerge Pages: 2

Brand: Dahua Technology Pages: 15

Brand: ACTi Pages: 2

Brand: 2gig Technologies Pages: 4

Brand: Idis Pages: 49

Brand: Koukaam Pages: 23

Brand: Paradox Pages: 2

Brand: Smart I Pages: 3

Brand: Eminent Pages: 12

Brand: WATERGUARD Pages: 2

Brand: Basler Pages: 55

APO-MACRO-ELMARIT 100 mm f/2.8

Brand: Leica Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands