Attract HMT-1030, Manual, Page: 21 / 64

+46(0)20-220 220 • www.attract.nu Attract Treadmill 1030
5
NOTE. Check that the belt is centered. If it is not, adjust
the belt so that it runs freely (see section on Regular Maintenance page 11).
Changing the belt’s incline
1. Loosen the locking screw one turn (see picture 1)
2. Move the pin to desired position (there are three choices)
Top hole (level position), middle hole (3,5% incline), bottom hole (7% incline)
Release the pin by pulling it straight out and secure the pin by pushing it
straight in. (see picture 2)
3. Tighten the locking screw. (see picture 1)
Incline of belt/folding away
Picture 1
Picture 2
Adjust the treadmills incline
with the help of the pin on
the adjustable feet
Folding away your treadmill.
1.Turn off the treadmill, turn off the main
power switch and pull out the plug.
2.Loosen the safety screw
3.Lift up the base, pull out and secure the pin
on the left side of the frame.
Note. Store the safety screw in the container
for locking screws.
Loosen
Tighten