ATTO Technology FastStream NDMP 4600, Installation And Operation Manual

Page: 42 / 58

35
ATTO Technology Inc. FastStream Installation and Operation Manual
5.1.5 Serial port configuration commands
The ATTO FastStream NDMP 4600 serial ports or serial headers are configured with default settings
but may be customized to your specifications using the CLI commands in this section.
SerialPortBaudRate
Configures/reports the baud rate for the FastStream
NDMP 4600 NDMP Balancers-232 serial port or serial
header. The number of data bits per character is fixed at
8 with no parity. Choices are 9600, 19200, 38400, 57600
and 115200.
Default: 115200
set SerialPortBaudRate [9600 |19200 | 38400 | 57600
|115200]
Requires a SaveConfiguration command
get SerialPortBaudRate
SerialPortEcho
Enables/disables/reports the echoing of keyboard input.
When enabled, all non-control character keyboard input
is output to the display.Local ASCII terminal (or terminal
emulator) echo settings should be set to disabled while
using SerialPortEcho enabled
Default: enabled
set SerialPortEcho [enabled | disabled]
Requires a SaveConfiguration Restart command
get SerialPortEcho