17
Power-Up
Figure 4
1)
Press the green start button to turn the display on.
Figure 5
2)
To engage the turbine, turn the key switch to the right (to position 2)
and hold for app. 5 seconds. The clutch will engage with a mechanical
sound.
The key will automatically return to the middle (position 1), when
released.
See Figure 10
3)
The pre-heater symbol in the display will flash after app. 15 seconds
(and the starter engine will engage with a recognisable sound) and the
current temperature will be displayed, when above app. 50
˚C.
Figure 6
4)
The “
Start-up
/Wait” symbol flashes.
5)
It is important to move the machine, when the Start-up/Wait
indication flashes in order to avoid burn marks on the ground.
Summary of Contents for Zirocco-M50
Page 1: ...Operating Manual Zirocco M50 Jet Dryer Cleaner ...
Page 24: ...24 Dimensions ...
Page 25: ...25 ...
