ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 76 / 366

64 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Installation
Install the SuperTrak Conveyance Platform in an Over/
Under Configuration
This section describes how to install SuperTrak conveyance platform in an over/
under configuration.
1. Inspect the base plate to verify that it includes the correct features outlined in
the
SuperTrak conveyance platform Mechanical Drawings.
2. Position the base plate across two (2) or more metal saw horses, with the
slotted cut-outs facing up.
Always use appropriate lifting devices (for example, a forklift or crane)
and use safe lifting practices and procedures when lifting a straight or
curved section.
See
Lift a SuperTrak Conveyance Platform Section on page 74.
ATS recommends that you obtain relevant information from your national
Health and Safety Authority.
Make sure the frame is designed to hold the weight and force of the
SuperTrak conveyance platform sections.
This procedure assumes that your frame includes the correct hole pattern
on the top and sides of the frame.
See the
SuperTrak conveyance platform Mechanical Drawings for
additional information.