ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 59 / 366

SuperTrak™ GEN3 System Operation and Maintenance Manual 47
Rev. 9 (12-2021)
Installation
This section describes how to install the SuperTrak conveyance platform.
Prerequisites
The following services and components are required to successfully install the
SuperTrak conveyance platform:
• A non-compressing installation surface (for example; a concrete floor)
• Electrical connections to the SuperTrak conveyance platform control panel:
• AC incoming power from the main electrical cabinet
• North America: PE, 40A (or 20-30A on smaller
systems)
• Europe: PE, 40A (or 20-30A on smaller systems)
• Safety circuit connection (fail safe digital 24V output to enable motor
power)
• PLC network connections (EtherNet/IP, PROFINET, or alternate)
• TrakMaster software
• Computer with Windows and network connectivity
• Ethernet cable
• Tools:
• 0.5 mm (0.02 in.) shims
• Feeler gages
• Framing square
• Mallet
• Straight flat bar 38.5 cm (15.16 in.) long
• Precision spirit level
• Set of metric hex keys
• Set of metric wrenches or spanners