ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 287 / 366

System Specifications
SuperTrak™ GEN3 System Operation and Maintenance Manual 275
Rev. 9 (12-2021)
Electrical Services
Electromagnetic Compatibility (EMC) Requirements for
High-Frequency Emissions
The following table provides the high-frequency emissions in accordance with
EN 61000-6-4:
Service Specification Value
Control panel Line voltage 208PE
Or
400PE
Frequency 50/60 Hz
Phases 3 ph, 5-wire
Short circuit current rating 5kA
Largest load 20A
Control voltage 24VDC (digital power supplied
from the control panel)
28VDC (motor power supplied
from the power supplies)
Full load amps 36A
UPS (located
inside the control
panel) Line voltage 24VDC
Frequency 50/60 Hz
Current rating 15A
Emission Test Accordance Class Emission
Conducted emissions IEC 55011 Class A Group 2 150 kHz - 30 MHz
Radiated emissions IEC 55011 Class A Group 2 150 kHz - 1000 MHz