ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 282 / 366

270 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Troubleshooting
Coil Driver Board (ACB3000) Indicator Lights
The coil drive board has two (2) indicator lights: one green, and one red.
G
10 (TEMP)
d
Yellow ON

The gateway board is the last in the
network.
OFF

The gateway board is not the last in
the network.
a. STAT stands for status.
b. COMM stands for communication.
c. CURLIM stands for current limit. Note that the text does not correlate to the LED function.
d. TEMP stands for temperature. Note that the text may not correlate to the LED function. Gateway
boards that were manufactured before mid-2016 and have not received a CPLD firmware update
use the yellow LEDs as follows: ON=defective thermistor detected, blinking fast=the operating tem-
perature limit is exceeded, OFF=the motor temperature is within operating range.
Indicator
Light Light State Normal A Problem May Exist
Green ON

(power is ON)
OFF The power is OFF.
Red ON The A/D CPLD is not programmed. Contact your
vendor for assistance.
OFF

ID LED # Color Light State Normal A Problem May Exist