ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 25 / 366

Safety Information
SuperTrak™ GEN3 System Operation and Maintenance Manual 13
Rev. 9 (12-2021)
Label Descriptions
Labels are applied throughout the SuperTrak conveyance platform to warn users of
possible or certain hazards. Read this section carefully and comply with the
required actions, warnings, or prohibitions.
Identification Label
An electrical nameplate is located on the door of the control panel. It specifies the
SuperTrak conveyance platform power requirements and provides the electrical
drawing reference number (25202161).
Maintain correct SuperTrak conveyance platform power requirements. If power
levels fall below or rise above the requirements specified on the identification
label, the SuperTrak conveyance platform will not work properly and damage may
occur.
Marking Labels
Mandatory Action Labels
Label Label Name Description
Ground This label is affixed next to grounded connections.
The grounding conductor is the current path that enables
protective devices, such as circuit breakers and fuses to operate
when a fault occurs.
Label Label Name Description
Read and
Understand
the Manual Users should read the Operation and Maintenance Manual before
operating the SuperTrak conveyance platform. Technicians
should read and understand the Operation and Maintenance
Manual before conducting any work or service in the referenced
area. Personal injury may occur if the label warning is not
observed.
Label number: 6017X-ISO.
Mandatory
Lockout and
Tagout Personal injury may occur if the label warning is not observed.
See
Lockout and Tagout on page 11.
Label number: 6013X-ISO.