ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 22 / 366

10 SuperTrak™ GEN3 System Operation and Maintenance Manual
Rev. 9 (12-2021)
Safety Information
Thermal Hazards
The SuperTrak conveyance platform may include thermal hazards if temperature-
related TrakMaster configuration parameters are adjusted from the default value.
Thermal hazards include any excessively hot or cold point of contact. Thermal
hazards can cause contact injuries to exposed skin, or create a fire hazard. Use
shielding to avoid contact burns. Dissipate thermal to make sure the point of
contact is at a moderate temperature before working near it.
See Access the TrakMaster Built-in Help on page 141 to access the TrakMaster
built-in help for more information about configuration parameters.
Allow adequate time for hot surfaces to cool before commencing work.
Wear the appropriate PPE when working on or near the thermal hazard.
Use a non-contact thermometer to verify the temperature.
The lifespan of some SuperTrak components may be compromised when
temperature-related TrakMaster configuration parameters are adjusted
from the default value.
For optimum lifespan of SuperTrak conveyance platform components, do
not increase the default value of the electronics temperature
configuration parameter, and use caution when increasing the coil
temperature configuration parameter:
• Coil Temperature Limit (°C); default=60, hard limit=90.
• Electronics Temperature Limit (°C); default=60, hard limit=70.