ATS SuperTrak GEN3, Operation And Maintenance Manual, Page: 127 / 366

Controls and Connections
SuperTrak™ GEN3 System Operation and Maintenance Manual 115
Rev. 9 (12-2021)
Energy Controls
This section describes the energy controls on the SuperTrak conveyance platform.
SuperTrak Conveyance Platform Power Disconnect
Switch
The SuperTrak conveyance platform power disconnect switch is located on the
control panel door.
Use the SuperTrak conveyance platform
power disconnect switch when any electronic
service or maintenance work is completed.
To isolate the SuperTrak conveyance platform
power, turn the
SuperTrak conveyance
platform power disconnect switch to the
OFF position. The switch is lockable in the OFF
position to prevent accidental or unauthorized
enabling of electrical power to the system.
See Hazardous Energy
on page 8.
Uninterruptible Power Supply
An uninterruptible power supply (UPS) is located inside the control panel.
The UPS provides power to the controller and digital electronics. This maintains
pallet position information and allows network communications to continue. The
UPS does not provide motor power or cause pallet movement.
Servicing an electrical panel that is still connected to its power source
may cause injury or death. Unless directed otherwise, turn the
main
power disconnect switch to the OFF position. Lock out and tag out the
switch before accessing and servicing the electrical panel. Only electrical
technicians should perform service on the electrical panel.
See
Hazardous Energy on page 8 and Lockout and Tagout on page 11.
The SuperTrak conveyance platform control panel is designed to be
integrated with a main electrical panel, which includes a
main power
disconnect switch. Use the main power disconnect switch to turn
OFF system power, but maintain digital (UPS) power in the control panel.
Only use the
SuperTrak conveyance platform power disconnect
switch when replacing a SuperTrak conveyance platform electrical
component.