3-26
Maximus Reference Manual
MANU-MAXIMUS-02
Revision-02
ATS Setup Mode
Chapter 3: Monochrome Terminals
If you selected Serial for the Host Type
1.
If you selected
Serial
for the
Host Type
the terminal prompts you to enter the
terminal (clock) address (
Enter Clock Address
). Press the enter key to accept
the displayed value or press the clear key then use the numeric keys to change
it. The valid range is from
1
to
32
. Press the
enter
key to set the displayed value.
This value needs to match what is set in the host computer.
2.
Next the terminal displays the
Select Device Type
parameter that enables you
to select either
Modem
or
Direct
. Typically, you select
Direct
when the host
connects directly to the terminal. In this case only one clock address applies (
1
set via the
Enter Clock Address
parameter).
3.
Next the terminal displays the
Enter Country Code
parameter. Use the numeric
keys to type the country code of the terminal. This can be a value from
01
to
FF
.
Press the
enter
key to accept (set) the displayed value and continue or press the
clear
key then use the numeric keys and/or the function keys to enter the code
(The function keys enable you to enter hexadecimal numbers A to F). Press the
enter
key when finished to save the code and proceed to the next menu item.
Enter Clock Address
_2
Select Device Type
Modem
Enter Country Code
_1
