4-24
Maximus Reference Manual
MANU-MAXIMUS-02
Revision-02
Setup Mode
Chapter 4: Color Terminals
In addition, the
GSM PPP Setup
screen displays the GSM/GPRS Host IP address
in the center of the screen (the IP address of a public-facing server that
communicates with the terminal using the wireless data network). To change
this IP address, press the “F3” key to select
Host IP Address
and go to the
Enter the Host TCP/IP Address
prompt screen.
Use the numeric keys to type the new Host IP address (You can press the
“
clear
” key to delete a number) then press the
enter
key to apply the change.
The terminal returns to the
GSM PPP Setup
screen and displays the new value
for the
Host IP Address
in the center of the screen.
Figure 4-20
GSM PPP Setup Screen
Configuring WiFi
1.
To configure the WiFi interface (if installed), press the “F8” key to select
Setup
WiFi
. PPP must be disabled before you can enable WiFi. The center of the screen
displays the WiFi Signal and Version.
For more information on setting up GSM/GPRS terminals, see
2.
Select
Next
(“F8” key). The center of the screen displays the
Set SSID
prompt.
Press the enter key to set the SSID. This will enable WiFi (if disabled). The center
of the screen displays the Set SSID prompt. Use the numeric keys for numbers
and the function keys for letters to define the SSID. Press the enter key when
finished.
03:38:15
Friday
Nov 7, 2014
TCP/IP
Client
Provider
nnnnnnn
Host
IP
Address
Return
To
Setup
Socket
Port
Append
EOT
No
PPP
Enabled
Enable
WiFi
Provider nnnnnn
Host XXX.XXX.XXX.XXX
Socket Port XXXX
GSM PPP Setup
