18 05.31.13
Note: Remote fix scheduling is only available on serial numbers greater than 030420.
Remote duration, remote mortality, and remote satellite transmission scheduling is only
available on serial numbers greater than 031040. Collars with serial numbers outside this
range that need these additional remote options must be returned to ATS for upgrading.
Please contact ATS for details.
Section 10 Breaking-Off the Collar
There are two ways to break-off the collar. 1) You can send a release command remotely, and 2)
you can program the collar to be broken off when its battery becomes low.
ATS
Fixes
for Satellite Collars software defaults to breaking off the collar on Low Battery. If you
don't want to use this option you will need to remove the checkmark on the left side of the Step 3
screen. We recommend you implement the low battery, automatic break-off option during
programming.
At any time, you can send an email to break-off the collar remotely via satellite. The message to
break off the collar can only be received by the collar when it is transmitting data to the satellite
(a schedule you set up using the ATS
Fixes
for Satellite Collars software). Therefore, when a
release request has been made, the collar will not release immediately but rather when the next
successful data transmission occurs.
Click on the Break Off Collar Via Satellite button of the ATS
Fixes
for Satellite Collars Software
to remotely command a collar break-off. If your computer’s e-mail client is Microsoft Outlook,
the ATS
Fixes
for Satellite Collars software will automatically send the email for you. If you are
not using Outlook or have any other issue, you may manually request a breakoff. Send an email
to
. The subject line of the email should be written exactly as follows:
Breakoff:XXXXXX
. Where XXXXXX is the 6 digit serial number of the collar you are
requesting to break-off. No text in the body of the email is necessary. The subject line of the
email shouldn't have any extra characters, such as spaces.
The ATS Host Processing computer will confirm that the email is arriving from the same email
address as registered with ATS for that collar (the email address that is used for sending out the
data for that collar). This is to ensure that no one breaks-off another customer's collar by mistake.
If the break-off email contains the correct serial number for this customer, then a confirmation
email will be sent to the customer's email confirming that the break-off request was correctly
received. If there is an error during the process, an email will be sent to the originating email
address and indicate an error has occurred.
Summary of Contents for G2110E
Page 21: ......