13 05.31.13
3.
Observe where the set of holes on the collar attachment piece shows up on the main
collar and line up these holes with a set of holes on the main collar such as to maintain a
desired tension level on the animal’s neck. The collar attachment bracket may or may
not be in the set of holes on the main bracket that have been determined to have the
desired tension.
4.
Place the collar attachment bracket through both sets of holes and through the brass
bracket and tighten the collar adjustment bracket nuts using the provided nut driver. Do
not over-tighten as this may damage the collar adjustment bracket.
5.
Finally ensure that the case nuts and squib nuts have been tightened before releasing the
animal.
Section 6 Downloading Data from the GPS Collar
Once GPS position data have been stored in the GPS Collar memory, they can be downloaded to
your computer. Data is grouped into two categories: originally programmed schedule data and
email adjusted schedule data. You may only download one group of data at a time. Note that
during data download, the VHF transmitter will be silent even if it was scheduled to beep.
Steps for Downloading Data
1.
Attach the GPS Collar to the PC device via GPS Offload Cable, PN16491.
2.
Open the ATS
Fixes
for Satellite Collars Programming software.
3.
Click the Download Data button.
4.
Choose between Degrees, Decimal Minutes or Decimal Degrees for the data format of
the GPS data.
5.
Choose between originally programmed schedule data or email adjusted schedule data.
6.
Click the Continue button.
7.
Touch the magnet to the GPS Collar to initiate communication.
Summary of Contents for G2110E
Page 21: ......