Epson Z8050 Projector
Setup and Troubleshooting Guide
Page 1 of 2
BASIC SETUP
1. Remove the projector and all of the included accessories from the packaging.
2. Place the projector on a table or stand with the front of the projector facing the direction you would like
the image to be projected. You will need to install the lens on this projector before use.
3. Lens Installation
a. Remove the front cover of the projector by loosening the two screws on the right side and the
one screw on the left side of the cover.
b. Pull the front cover straight out.
c. Insert the lens unit straight into the lens insertion section with the white circle on the lens facing
up.
d. While holding the lens firmly in place, pinch the lock lever clockwise until it is locked into place.
Check that the lens can’t be detached.
e. Replace the front cover by sliding it straight on and tightening the three screws.
4. Connect the included power cord to the projector and plug it into a nearby wall outlet or a heavy duty
extension cord.
CONNECTING YOUR SOURCE
1. Connecting Your Computer
a. To connect your laptop to the projector, connect the included VGA cable from the VGA output of
the computer to the VGA input of the projector.
b. To connect a MAC computer, you will need a MAC adapter between the computer and the VGA
cable. MAC adapter packs are available to be rented from ATS Rentals as well.
c. Power on your computer before you power on the projector. The projector should automatically
find the connected source.
2. Connecting Other Video Sources
a. To connect a DVD player or other source to the projector, connect the included HDMI cable
from the HDMI output of your source to the HDMI input of the projector.
3. To power the projector on, push down the power button on the back of the projector or on the remote.
4. For more detailed information on connecting these and other sources to the projector, reference pages
29-33 of the instruction manual.
ADJUSTING THE PROJECTED IMAGE
1. Adjusting the Position
a. Press the lens shift button on the remote or on the back of the projector until “Adjust Lens Shift”
appears on the screen.
b. To adjust the position, use the arrow button on the remote or the arrows on the back of the
projector to move the image.
c. When you are finished, press the escape button to exit.
Questions? Call 1-815-686-2687 or email [email protected].
For urgent technical support outside of business hours call 1-815-230-1911.
