Atrust t180W, User Manual

Page: 63 / 140

Configuring Client Settings
Configuring System Settings
53
Disabling the Appliance Mode
To disable the Appliance mode, please do the following:
1. Under the Appliance mode, exit the Full Screen mode of the RDP / ICA session, or release the keyboard and
mouse from the View session (virtual desktop):
• To exit the Full Screen mode of the RDP session, press
Ctrl + Alt + Pause
.
• To exit the Full Screen mode of the ICA session, use the XenDesktop toolbar at the top
(You may not in the Full Screen mode).
• To release the keyboard and mouse from the View session (virtual desktop), press
Ctrl + Alt
.
NOTE
• Please note that the View session (virtual desktop) will remain on the background
after you release the keyboard and mouse from the View session (virtual desktop).
2. Click Ctrl + Shift + Del to launch Atrust Client Setup.
NOTE
• You cannot access the local desktop under the Appliance mode.
3. On Atrust Client Setup, click
System
>
Appliance Mode
.
4. Click to uncheck Enable Appliance Mode , and then click Save to apply the change.
5. Return to the current RDP / ICA / View session:
• To return to the current RDP / ICA session, use
Alt + Tab
(press and hold
Alt
, and then press
Tab
to switch
between different items) to select and restore the current RDP / ICA session.
• To return to the current View session, click any place of the View session (virtual desktop)
on the background.
6. Log off from the current RDP / ICA / View session.
7. The client might shut down then. Restart your client manually.