Atrust T180L User Manual Download Page 179

Page: 179 / 236

Configuring Client Settings

Configuring Service Access Settings

169

4.6.11 Configuring Advanced ICA Connection Settings

The tables below provide a description of each setting item for ICA connections. Please refer to these tables to

configure advanced settings and customize shortcuts on the local desktop and START menu for service access.

NOTE

•

Please note that available settings vary with the selected connection type.

Settings for the Connection Type of Web Logon

NOTE

•

For descriptions of available settings for the connection type of StoreFront, please

refer to “Settings for the Connection Type of StoreFront” on page 173.

•

For descriptions of available settings for the connection type of VDI-in-a-Box, please

refer to “Settings for the Connection Type of VDI-in-a-Box” on page 178.

•

For descriptions of settings for the connection type of XenDesktop, please refer to

“Settings for the Connection Type of XenDesktop” on page 183.

•

For descriptions of settings for the connection type of XenApp, please

refer to “Settings for the Connection Type of XenApp” on page 188.

•

For descriptions of settings for the connection type of Server Connection, please

refer to “Settings for the Connection Type of Server Connection” on page 193.

Summary of Contents for T180L












































































































































































































































Search results

Summary of Contents for T180L

Reviews:

Atrust T180L, User Manual, Page: 179 / 236

Search results

Summary of Contents for T180L

Reviews: