Atrust m320, User Manual

Page: 32 / 50

Getting Your m320 Ready for Use
Updating Drivers and the Utility
24
13. The Logon screen appears on the station.
NOTE
• You may need to wait a few seconds for this Logon screen to appear.
14. The bonding between your LAN station and its host server is established, and the m320-based LAN station is
now ready for use.
3.4 Updating Drivers and the Utility
Updating the Video Driver for your m320
To update the video driver for your m320-based LAN stations, please do the following:
1. On the primary station, log in to your MultiPoint Server system with an administrative account, and then
launch
MultiPoint Manager
.
2. On MultiPoint Manager, switch your system to the Console mode by clicking
Switch to console mode
.
3. A window appears prompting for confirmation. Ensure that you and other system users have saved their
work before clicking
OK
.
WARNING
• Switching the system mode will end all user sessions. Ensure all users have saved
their work to prevent data loss.
4. Switch off all your m320-based LAN stations.
5. Unplug all your m300 / m302-based USB stations if any.