Atrust m320, User Manual

Page: 19 / 50

Setting Up Your m320
Positioning Your m320
11
2.1 Positioning Your m320
There are two ways to position your m320:
• Put it on a desk or a desired place horizontally.
• Mount it on the back of a monitor using a VESA mount kit.
NOTE
• The VESA mount kit is an optional accessary for your m320. Your deal may not
contain a VESA mount kit. Contact your dealer if needed.
To mount your m320 on the back of a monitor, please follow the steps below:
Step 1: Understand Your VESA Mount Kit for m320
Step 2:
Mount Your m320
Step 1: Understand Your VESA Mount Kit for m320
Your m320’s VESA mount kit consists of a bracket and six screws.
Mount Bracket for m320
Refer to the following figure and descriptions for the VESA mount holes on the mount bracket for m320.
Mount Hole Description
1 The VESA mount holes used to secure the bracket to your m320.
2 The VESA mount holes (with the distance of 100 mm) used to secure the bracket to a monitor.
3 The VESA mount holes (with the distance of 75 mm) used to secure the bracket to a monitor.
Six screws with
two types
Mount bracket
2
1 1
2
3 3