94
Other settings and functions
Announcement (broadcast) to all members of
a line trunk group
You can use this function to send an announcement to all members
(10 to 40) of a line trunk group.
Z
Once you have activated the group call, you will hear a confirmation
tone. You can then begin the announcement.
j
Lift the handset.
or
Press the key shown for speakerphone mode.
j
Enter the system code for "Speaker call-1-way bcst" (consult your ad-
ministrator if necessary).
or
Press the programmed "Broadcst Spk" key.
j
Enter the internal phone number of a group member.
Z
The loudspeakers on all group phones are automatically switched on
and you will hear a confirmation tone. You can begin the announce-
ment.
k
You end the announcement by replacing the handset.
j
If a group member lifts their handset, they are connected to you and
the announcement is ended.
If a group member presses the speaker key
or
the relevant line key for the announcement, they are disconnected
from the announcement. If the last remaining member of the group
presses the speaker key or line key, the announcement ends.
Broadcst Spk
DSS