manualshive.com logo in svg

Atos Unify OpenScape CP110, User Manual, Page: 83 / 116

Share
Download
Atos Unify OpenScape CP110 User Manual Download Page 83

Making calls in an executive/secretary team

83

Using a second (executive) telephone

Prerequisite:

 A second phone has been configured for the executive. 

A "Group Park" programmed function key is configured on the first and 

second executive phones.

Parking a call on the first phone

Press the programmed function key "Group Park".

Continuing a call on the second phone

j

Lift the handset.

Press the programmed function key "Group Park".

Activating and deactivating a second 

executive call

On the executive phone, you can configure calls to go to the secretary 

phone when you are on a call. If you are on a call and are expecting 

another important call, it may be useful to activate the second call fea-

ture.

Open the menu 

 Page 18.

Select and confirm the option shown.

Confirm the option shown.

Confirm the option shown.

or

Confirm the option shown.

Group Park

Group Park

Feature settings? 

g

f

Camp-on?

f

Activate?

f

Deactivate?

f

Summary of Contents for Unify OpenScape CP110





















































































































Reviews:

No comments