manualshive.com logo in svg

Atos Unify OpenScape CP110, User Manual, Page: 48 / 116

Share
Download
Atos Unify OpenScape CP110 User Manual Download Page 48

48

Making calls

Activating and deactivating fixed forwarding 

by means of an option

You can activate/deactivate fixed forwarding using the switch functi-

on.

Open the menu 

 Page 18.

Select and confirm the option shown.

Select and confirm the option shown to activate or deactivate fixed 

forwarding. "Fixed call forw. is on" or "FWD-FIXED off" is displayed.

Variable forwarding (all calls)

In the case of variable forwarding, programming a forwarding desti-

nation activates forwarding for all calls. If forwarding is deactivated, 

the forwarding destination is deleted at the same time.

Configuring and activating variable forwarding

€

Open the idle menu 

 Page 15.

Select and confirm the option shown.

or

Open the menu 

 Page 18.

j

Enter the forwarding destination number.
Confirm when the complete number has been entered.
Forwarding is saved and activated.

Deactivating variable forwarding

€

Open the idle menu 

 Page 15.

Select and confirm the option shown. Call forwarding is deactivated. 

The destination number is deleted.

Feature settings? 

g

Call forwarding? 

g

Variable call forwarding on

f

Destinations

l

Save?

l

If you enter a cross-system number, you have to complete entry 

of the phone number by pressing 

#

.

Call forrwarding off

f

Summary of Contents for Unify OpenScape CP110





















































































































Reviews:

No comments