manualshive.com logo in svg

Atos Unify OpenScape CP110, User Manual, Page: 24 / 116

Share
Download
Atos Unify OpenScape CP110 User Manual Download Page 24

24

Telephone settings

Call settings

Activating and deactivating second call

You can indicate whether or not you wish to accept a second call (call 

waiting) during a call.

Open the menu 

 Page 18.

Select and confirm the option shown.

Select and confirm the option shown.

Select and confirm the option shown.

or

Select and confirm the option shown.

System speed-dial numbers

Speed-dial numbers are saved in the system.
Your administrator will provide you with the system speed-dial direc-

tory in printed form for example.
Making calls using speed-dial numbers 

 Page 42.

If your phone belongs to a PU or ONS group (One Number Ser-

vice/parallel call 

 Page 99), please note the following:

In addition to an alerting tone on the busy phone, the second call 

is signaled with a ring tone on the other phones in the PU or ONS 

group.

Feature settings?

f

Camp-on?

l

Activate?

l

Deactivate?

l

Speed-dial numbers are configured by your administrator.

Summary of Contents for Unify OpenScape CP110





















































































































Reviews:

No comments