Atos UNIFY OpenScape 4000, User & Administrator Manual, Page: 56 / 77

56 Programming function keys
Additional repdial key functions
Prerequisite: You have defined a phone number for a repdial key and are still
in the menu

page 55.
Entering an automatic consultation call
Select and confirm the option shown. "RF" appears in the display.
j
Add the destination number.
Entering a number with a pause (example)
Select and confirm the option shown. The display shows: "P".
j
Enter additional numbers.
Repdial keys with enhanced functions
Some functions are not available via the menu - you must enter codes to access
them. These codes are configured in the HiPath 4000 system. You can obtain
these codes from your administrator.
Example: Locking the phone with simultaneous call forwarding
*20
Enter the phone locking code.
#47
Activate the code for call forwarding.
j
Enter the destination phone number.
Enter Consult
If you press this key during a call, a consultation call is immediately set up.
The first party is placed on hold, the number of the saved destination is di-
aled.
Enter Pause
A pause is three characters long.
The codes used here are examples and may differ from the settings in your
system.
In networked systems, the sequence must end with
#
.