Atop Smart Security Server
IS150
User Manual V1.0
54
5 WAN Configuration
5.1 PPPoE
Often used when there is an xDSL connection provided by your Internet Service Provider (ISP). Enter
the
Username
and
Password
provided by your ISP in the blank fields (Figure 5.6). If you want IS150
to connect to the Internet automatically when it boots up, enable “
Dial when boot up
.”
Note:
IS150 uses Port 2 (the upper port) as the WAN port.
Figure 5.1
Double check yo
ur configuration by clicking “
Connect PPPoE
.” If
PPPoE
has connected successfully,
the connection status will become
Connected
with an
IP
and
Gateway
obtained from the ISP as in
