Atop SE59XX-SDK, User Manual, Page: 31 / 75

SE59XX-SDK
Software development Kit
User Manual
V1.2
3.3 Hardware
Table 3 . 3 Hardware features
System
CPU
32 - bit ARM Based TI CPU AM3354 800MHz
(except SE5908A/SE5916A use AM3352 1GHz)
Flash Memory 32MB
RAM
SE5901 DDR2 128MB
SE5901B DDR2 256MB
SE5904D DDR3 256MB
SE5900A/08A/16A/MB5908/16 DDR3 256MB
EEPROM 8 KB
Reset Built
-
in Recessed Key
)
Restore to Factory Defaults
(
Watchdog Hardware built - in
Network
Ethernet Interface
I EEE 802.3 10BaseT
IEEE 802.3u 100BaseT(X)
IEEE 802.3ac 1000BaseT(X) – SFP version of SE5904D only
IEEE 802.3af (PoE PD) –selected SE5901 and SE5904D versions
can be powered through PoE
Connection: SFP or RJ45
Serial
Serial Interface
RS-232/RS-422/RS-485 Software Selectable (Default: RS-232)

The first port available on SE5901B is RS-232/RS-485

The second port available on SE5901B-IO-X is only RS-232

The isolation version (-SiS) on SE5908/SE5916/SE5908A/
SE5916A supports only RS-422/ RS-485
Serial Connector
Connector Type

SE5916 -16 Serial Ports (RJ45)

SE5908 - 8 Serial Ports (RJ45)

SE5916A – 16 Serial Ports (TB-5 or DB-9)

SE5908A – 8 Serial Ports (TB-5 or DB-9)

SE5904 – 4 Serial Ports (TB-5 or DB-9)

SE5901 – 1 Serial Port (TB-5 or DB-9)

SE5901B – 1 Serial Port (TB-14 or DB-9) – includes I/O
Protection
SE5901/SE5901B no isolation
SE5904D/ SE5908A/16A (optional 3V)
SE5908/16 (optional 2.5kV)
Serial Port
Communication
Baud - rate : 1200 bps ~ 921600 bps
Parity : None, Even, Odd, Mark, or Space
Data Bits : 5, 6, 7, 8
Stop Bits : 1, 2 Software Selectable
Flow Control
:
RTS
/
CTS
)
RS
-
232 only
(
, XON
/
XOFF, None