Atop SE59XX-SDK, User Manual, Page: 23 / 75

SE59XX-SDK
Software development Kit
User Manual
V1.2
Note : Make sure the binary mode to be set during the t ransmission.
Remember to use "chmod" command to modify the access at t r ibute of these files . I f t ransmission failed, please check
the networking connection okay or not between SE59XX platform and Host P C .
2.9 Login or Remote Login to the device
2.9.1 Remote Login
1) Se tu p or read FT P account and password f rom Atop boot-loader menu as Figure 1-16
2) Use any tools sup por ting the telnet p rotocol such as "ssh" inside of Windows.
3) Ente r SE59XX_TARGET_ I P via ssh using software put t y .
4) Login account as fi rs t s te p shown.
2.9.2 Use a debug command line to Login
I f you’re not p ressing “Esc” but ton within 3 seconds f rom boot-u p , the device will enter Linux login mode as pe r
screenshot below
Figure 2.16 Command line Login
2.10 Automatic execution on Startup of Custom-Applications
1) Put your star tu p scri p t "user_ p re .sh or user_ post .sh" into /jffs2 of root file system via FT P or TFTP .
2) SE5904D will execute both user_ p r e . sh and user_ post . s h" af te r s tar tu p f rom next reboot .