Industrial Managed
Ethernet Switch – EH9711
User Manual
Page
52
of
223
Figure 2.44 Webpage
to Configure SNMP Access
Table 2.28 Descriptions of SNMP Access Configuration
Label
Description
Factory Default
Delete
Check to delete the entry. It will be deleted during the next save.
Group Name
A string identifying the group name that this entry should belong to.
Default_ro_group
Security Model
Indicates the security model that this entry should belong to. Possible
security models are:
any
: Any security model accepted(v1|v2c|usm).
v1
: Reserved for SNMPv1.
v2c
: Reserved for SNMPv2c.
usm
: SNMPv3, User-based Security Model (USM).
any
Security Level
Indicates the security model that this entry should belong to. Possible
security models are:
NoAuth, NoPriv
: No authentication and no privacy.
Auth, NoPriv
: Authentication and no privacy.
Auth, Priv
: Authentication and privacy.
NoAuth, NoPriv
Read View Name
The name of the MIB view defining the MIB objects for which this request
may request the current values.
None
Write View Name
The name of the MIB view defining the MIB objects for which this request
may potentially set new values.
None
2.5.1.14
RMON Statistics
Figure 2.45 shows
RMON
(Remote Network Monitoring)
Statistics
Configuration. Atop’s managed switch can monitoring
network traffic on remote Ethernet segment to detect problem inside the network. The entry index key is
ID
for RMON
Statistics table. Click
Add New Entry
button to add a new RMON Statistics entry to the table as shown in Figure 2.46. Table
2.29 describes the column labels of the RMON Statistics table. Please click on the
Save
button afterwards for a change to take
effect, or click
Reset
button to undo any changes made locally and revert to previously saved values.
