Industrial Managed
Ethernet Switch
User Manual
錯誤
!
使用
[
常用
]
索
引標籤將
Heading
1,Product Manual
套用到您想要在此處
顯示的文字。
Page
108
of
191
2. Select specific ports to be included in certain group by checking the corresponding box under the Member ports
on particular row of port
-based VLANs’ Group ID. Note that if the users check the box under the Group ID
column, all of the Member Ports will belong to that VLAN
’s Group ID.
3. Click on the
Update
button to allow the setting to take effect on the managed switch.
Figure 2.119 Port
-
based VLAN Setting Webpage
2.13.4 Protocol
-
Based VLAN
For the protocol-based VLAN, the switch supports 3 Ethernet packet frame types: Ethernet II, 802
.
3 LLC, and 802
.
3
SNAP. It uses the EtherType field (Protocol ID) in these frames to assign a VLAN ID for each untagged packet.
There are two submenus for
Protocol-Based VLAN
:
Protocol to Group Setting
and
Group to VLAN Setting
.
2.13.4.1 Protocol to Group Settings
The users can add or modify the Group ID in this menu option, as shown in Figure 2.120. Here, the maximum of
16 rules are supported
.
“Protocol Group Setting” is used to define the protocol rule and assign a unique ID (Group
ID). The value of
Group ID
is between 1 to 2147483646. The
Frame Type
can be
Ethernet
,
SNAP
, or
LLC
.
The
“
Value
”
field in the webpage is the EtherType (Protocol ID).